TABLE OF CONTENTS
CONTENTS
Introduction ........................................................................1
Package Contents .............................................................. 1
Features ............................................................................. 2
Specifi cations ..................................................................... 2
Panel Descriptions .............................................................. 3
Connection and Operation ................................................... 4
Dear Customer
Thank you for purchasing this product. For optimum performance
and safety, please read these instructions carefully before
connecting, operating or adjusting this product. Please keep this
manual for future reference.
INTRODUCTION
4x4 HDMI Matrix Switch w/CAT5e/6 & HDMI Outs.
RS-232 + EDID + IR + 3D
This 4X4 HDMI Matrix Routing Switcher offers fl exibility and
convenience by routing High Defi nition audio/video from any of
four (4) HDMI sources to any of the four 4-port transmitters and 4
receivers over inexpensive, standard CAT5e/6 cable.
Four receivers work with the Switch Splitter as a full functional
module. Full High-Resolution HDTV signals are supported up to a
resolution of 1080p over HDMI cable 50 feet in length or 130 feet
using two (2) CAT6 cable cables. The 4X4 Matrix HDMI SWITCH
SPLITTER works with Blue-Ray players, AppleTV, TiVo, PCs, and
satellite set-top boxes that connect to an HDMI display. Every
source and display is accessible at all times by selecting it with an
IR remote, front panel buttons or through the RS-232 port.
The advanced chip set uses Re-Sample architecture to fi lter input
noise and recover the input data along with Re-Drive architecture
to regenerate clean TMDS signal. On-chip Equalizer which allows
data transmission on long cables.
PACKAGE CONTENTS
• 4X4 Matrix HDMI SWITCH SPLITTER
• IR Remote control (5 each)
• RS-232
Software
• Power Supply (5 each)
• User’s
Manual
• IR receiver (4 each)
1
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fi re,
electrical shock and injury to persons.
• To prevent fi re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the
PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow
for suffi cient space for air to circulate around the unit.
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.
We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update or
to keep current the information contained in this document.
We reserve the right to make improvements to this document and/
or product at any time and without notice.
COPYRIGHT
NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer fi le, in any form or by any means
— electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise — without express written permission and consent
© Copyright 2011. All Rights Reserved.
Version 1.1 MAY2012
TRADEMARK
ACKNOWLEDGMENTS
All products or service names mentioned in this document may
be trademarks of the companies with which they are associated.
