SERW_ENGLISH
101
12
Safety Features
▽
Overheating Detector
Water is not present in the Drain Pan
・
Parts are soiled with grease and burner flames are being sucked into
the exhaust duct.
・
Exhaust Fan is not operating properly.
・
The exhaust air volume is low due to filter
clogging, etc.
・
Clogged Burner Holes force gas to flow backward and burn at the Gas intake.
▼
If you hear warning sound, the switch of power turns OFF immediately and stop cooking.
▼
The appliance has cooled down for a minutes, and then warning sound stops.
▼
After cleaning and checking, heating using a heater again
▽
Overcurrent Prevention Device
▼
To prevent overcurrent, it makes Circuit protector turns off automatically.
▽
Electrical leakage Device
▼
In case of an electrical leakage, prevent electrical shock automatically.
Stop method of the warning sound and Caution.
In the case of stopping the warning sound, the switch of the power turns OFF and discontinues use
immediately.
Make sure to turn the Alarm Switch on again when normal operating conditions are restored (all the
causes for overheating have been removed and the appliance has cooled down to an acceptable level).
Ready for use, the switch of the power turns ON.
If the circuit protector turns off power, it turns on power after push the reset button.
Allow the appliance to cool down before you attempt to service the appliance.
If the directions above do not solve your problem(s), please contact your distributor or our
Service Center. Do not attempt to disassemble or repair the roaster unless you are properly
trained and licensed to do so. Disassembling or repairing by untrained individual may result
in a risk of appliances malfunction, injury or electric shock.
