6
3. Mounting
3.1 External dimensions (Scale: mm)
(Fig. 3.1-1)
3.2 Mounting and removal to/from the DIN rail
Caution
• Mount the DIN rail horizontally.
• To remove this instrument, a flat blade screwdriver is required for pulling down
the lever.
Never turn the screwdriver when inserting it into the release lever.
If excessive power is applied to the lever, it may break.
• Be sure to use commercially available fastening plates at both ends of the unit
if it is in a position susceptible to vibration or shock.
Recommended fastening plate
Manufacturer
Model
Omron Corporation
End plate
PFP-M
IDEC Corporation
Fastening plate BNL6
Panasonic Electric Works Co. Ltd.
Fastening plate ATA4806
Mounting to the DIN rail
(Fig. 3.2-1)
• Hook
1
of the instrument on the
upper side of the DIN rail.
• Making
1
part of the instrument
as a support, fit the lower part
2
of the instrument to the DIN rail.
The unit will be completely fixed to
the DIN rail when a “Click” sound is heard.
(Fig. 3.2-1)
22.5
97
100
4
DIN rail
75
1
2
