24
(7) Read the Main setting value (Example 1) set at item (6) by reading command. (Address: 0)
Input from header (STX) to Data item with the key, and press the
(Enter) key.
^B
1 0 0 0
Data item: (1000H)
Command type [Reading]: (20H)
Sub address: 0 (20H)
[00H + 20H = 20H]: " " space
Address : 0 (20H)
[00H + 20H = 20H]: " " space
Header STX (02H)
Press the <B> key while the <CTRL> key is being pressed.
The checksum is automatically calculated, and it is sent with the delimiter (ETX)
^B 1 0 0 0 D F ^C
Delimiter ETX (03H)
Checksum
When the command finishes normally, it responds as follows.
In the case of Main setting value 600 , Program pattern 0, Step 0.
^F 1 0 0 0 0 2 5 8 1 0 ^C
Delimiter ETX (03H)
Checksum
Setting
value
[Main setting value 600 ]
Data
item
Command
type
Sub address
Address: 20H
Header: ACK (06H)
[Acknowledgement]
Check if the display is as follows.
^B P10000258E0^C
^B 1000DF^C
----------------------------------------------------------------------------------------------------------------------------------
^F E0^C
^F 1000025810^C
Read the Main setting value (Example 2) set at item (6) by reading command. (Address: 0)
Input from Header (STX) to Data item with the key , and press the
(Enter) key.
^B
1 3 4 0
Data item: (1340H)
Command type [Reading]: (20H)
Sub address: 0 (20H)
[00H + 20H = 20H]: " " space
Address : 0 (20H)
[00H + 20H = 20H]: " " space
Header STX (02H)
Press the <B> key while the <CTRL> key is being pressed.
