Shinko DCL-33A Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 56

background image

16

Character

Name, Description, Setting Range

Factory Default

OUT1 low limit

0%

• Sets the OUT1 low limit value.
• Available for direct current output. Not available if OUT1 is in ON/OFF control.
• Setting range: 0% to OUT1 high limit value

(Direct current output type: –5% to OUT1 high limit value)

OUT1 ON/OFF hysteresis

1.0

• Sets the ON/OFF hysteresis for the OUT1.
• Available only for ON/OFF control (P=0).
• Setting range: Thermocouple, RTD input: 0.1 to 100.0

( )

DC voltage, current input: 1 to 1000 (The placement of the decimal point follows the

selection.)

OUT2 cooling mode

Air cooling

• Selects air, oil or water cooling for OUT2 action.
• Available only when Heating/Cooling control (DC option) is ordered.

Not available if OUT2 is in ON/OFF control action

•

: Air cooling

: Oil cooling
: Water cooling

OUT2 high limit

100%

• Sets OUT2 high limit value.
• Available only when Heating/Cooling control (DC option) is ordered.

Not available if OUT2 is in ON/OFF control action

• Setting range: OUT2 low limit value to 100%

OUT2 low limit

0%

• Sets OUT2 low limit value.
• Available only when Heating/Cooling control (DC option) is ordered.

Not available if OUT2 is in ON/OFF control action

• Setting range: 0% to OUT2 high limit value

Overlap/Dead band

0.0

• Sets Overlap/Dead band.
• Available only when Heating/Cooling control (DC option) is ordered.

Not available if OUT2 is in ON/OFF control action

• Setting range:

Thermocouple, RTD input: –100.0 to 100.0

( )

DC voltage, current input: 1 to 1000 (The placement of the decimal point follows the

selection.)

OUT2 ON/OFF hysteresis

1.0

• Sets the ON/OFF action hysteresis for the OUT2.
• Available only when Heating/Cooling control (DC option) is ordered.

Available only when OUT2 is in ON/OFF control action (P=0).

• Setting range: Thermocouple, RTD input: 0.1 to 100.0

( )

DC voltage, current input: 1 to 1000 (The placement of the decimal

point follows the selection)

Alarm 1 type

No alarm action

• Selects an Alarm 1 type.

Note: If Alarm 1 type is changed, Alarm 1 value returns to 0 (0.0).

•

: No alarm action

: High limit alarm

: Low limit alarm
: High/Low limits alarm
: High/Low limit range alarm
: Process high alarm
: Process low alarm
: High limit with standby alarm
: Low limit with standby alarm
: High/Low limits with standby alarm

: High/Low limits independent alarm
: High/Low limit range independent alarm
: High/Low limits with standby independent alarm

«
...
14
15
16
17
18
...
»

Содержание DCL-33A

























































Отзывы:

Нет отзывов

Похожие инструкции для DCL-33A

Бренд: Laars Страницы: 28

Бренд: VAT Страницы: 39

Бренд: Samson Страницы: 124

Бренд: Samson Страницы: 86

Бренд: VAC Страницы: 5

Бренд: WAGNER Страницы: 60

Бренд: Nemesis Страницы: 6

Бренд: Parker Страницы: 8

Бренд: Global Fire Equipment Страницы: 23

Бренд: HOMIDO Страницы: 29

Бренд: KSB Страницы: 16

Бренд: Thrustmaster Страницы: 9

Бренд: Acuity Controls Страницы: 5

Бренд: Risco Страницы: 232

CompleteStat-Series CS9B-THO

Бренд: Bard Страницы: 2

Бренд: Jeckson Electric Страницы: 2

Бренд: Hach Страницы: 48

Бренд: Rheem Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды