Shinkawa VM-7 Series Скачать руководство пользователя страница 28

Страница: 28 / 80

VM-7 System Manual

Chapter 2 Description of the System

<Analysis Module (VM-731)>

The Analysis Module transmits the analysis data of each module using Ethernet (100Base-T), e.g.
waveform, overall, vector of vibration.
The Analysis Module can be installed in Slot 8 and 9 or Slot 9 and 10 only in the instrument rack.

No. Name

Function

①

Module status indicator

When the module is normal: Lights (in green).
When the module has a problem: Does not light.
When the module is installed in other than

Slot 8 and

9 or Slot 9 and 10

: Flashes.

②

Communication
situation indicator

Communication connected: Lights (in green).
Communication disconnected: Does not light.
During data reception/transfer: Flashes.

③

Module fastener

This is used to fix the

Network Communication

Module

to the instrument rack.

④

Main board

A board on which electronic parts are mounted

⑤

DIN connector

A connector used for connecting to the motherboard

Содержание VM-7 Series

















































































Результаты поиска

Содержание VM-7 Series

Отзывы:

Shinkawa VM-7 Series, Системное руководство, Страница: 28 / 80

Результаты поиска

Содержание VM-7 Series

Отзывы: