Shining3D Aoralscan 2 Скачать руководство пользователя страница 9

Страница: 9 / 108

CHAPTER

Safety information

Precautions

WARNING

Follow the procedures carefully and ensure that the

power/electrical/environmental requirements are

satisfied. Failure to observe the instructions or

disregard the warnings may result in damages to the

product, personal injury, or even death of the user or

the patient.

Observe the following precautions carefully.

• Do not use the hardware and software for any application until

you have read, understood, and known all the safety

information, safety procedures, and emergency procedures

contained in this chapter. Operating the hardware and software

without a proper awareness of safe use could lead to fatal

damage to the hardware or permanent data loss.

• Ensure that the connection is performed correctly by

following the instructions given in Connecting the scanner

on chapter 4.

• Use only medical grade devices with the scanner in the patient

environment.

• The hardware and software should only be used in a medical

facility under the supervision of trained personnel.

• Only authorized service labs should perform maintenance.

It is expressly prohibited to open the scanner with tools.

• The hardware and software have been fully adjusted and

tested prior to shipment from the factory. Unauthorized

modifications will void your warranty.

Содержание Aoralscan 2













































































































Результаты поиска

Содержание Aoralscan 2

Отзывы:

Похожие инструкции для Aoralscan 2

Бренды по названию

Популярные бренды

Shining3D Aoralscan 2, Руководство пользователя

Результаты поиска

Содержание Aoralscan 2

Отзывы:

Похожие инструкции для Aoralscan 2

Бренды по названию

Популярные бренды