SHINING 3D - EinScan-Pro series - User Manual - June 2019
50
6.
HD Mode
HD mode means the hand-held scan mode with high resolution and high accuracy.
When the operator holds the scanner in hand and moves around the object, the data
is instantaneously captured and matched with previously captured data.
HD mode uses markers to align the data during the scanning process.
Prime (HD Prime pack add-on) can be used in this mode if your device is EinScan
Pro+. It improves a faster scanning speed and enables the feature alignment
(Markers-free) for scanning objects with enough geometry.
⚠Note:
The texture can’t be captured when scanning in HD mode or HD Prime.
6.1.
Handheld Scanner Key Function
6.2.
Before Scan
Enter the interface of New Project or Open Project. The default project is saved to
the desktop. You can change the saving path, and then the newly created project will
be saved to the new location. Click “New Project”, input the project name, then click
‘Save’ to enter the scan parameters window. Feature alignment is only active when
the HD Prime pack is attached and the scanned object has enough geometric
features. It is only applicable to the EinScan Pro+.
Содержание EinScan Pro
Страница 17: ...SHINING 3D EinScan Pro series User Manual June 2019 17 EXScan Pro on the start menu ...
Страница 30: ...SHINING 3D EinScan Pro series User Manual June 2019 30 Add on is required for this function ...
Страница 41: ...SHINING 3D EinScan Pro series User Manual June 2019 41 4 4 Scan Workflow ...
Страница 52: ...SHINING 3D EinScan Pro series User Manual June 2019 52 Browse to load a GMF ...