background image

ADV0801 Owner’s Manual Draft 

RadioShack 

ADV0801 

Digital Trunking Handheld Scanner 
 

Thank you for purchasing your Digital Trunking Handheld Radio Scanner from RadioShack. 

Your scanner scans conventional frequencies and trunked systems. Please read this user’s guide 
before installing, setting up and using your new scanner. 

 

What’s Included 
 

Scanner  Antenna  Rechargeable battery case 

Non-rechargeable battery holder 

Belt clip 

 

User’s Guide 

 

 

 
 

 

RadioShack, RadioShack.com, V-Scanner, and Adaptaplug are trademarks used by RadioShack 
Corporation. Motorola, Smartnet, Smartzone, Omnilink, ASTRO and Privacy Plus are 

registered trademarks of Motorola Inc. EDACS and ProVoice are registered trademarks of 
MA-COM Inc. LTR is a registered trademark of E.F. Johnson, Inc. The IMBE™ voice coding 

Technology embodied in this product is protected by intellectual property rights including 

patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding 
Technology is licensed solely for use within this Communications Equipment. The user of this 

Technology is explicitly prohibited from attempting to decompile, reverse engineer, or 

disassemble the Object Code, or in any other way convert the Object Code into a human 
readable form. U.S. Pat. Nos. 5,870,405 and 5,517,511. 

 

© 2008 RadioShack Inc. 
All Rights Reserved 

 

 
 

 

Contents 
 

will add 
 

 

 
Introduction 

 

Welcome to an exciting new world of radio scanning! Recognizing that contemporary scanning 
receivers are too hard to program and use, our engineers conducted extensive research to 

determine the functional requirements for an entirely new scanning receiver user interface. We 

call this new user interface the Object Oriented User Interface (OOUI), and it is based on the 
premise that, to a hobbyist, a scanner is easiest to use if all of the things that can be scanned 

are handled using common conventions for interaction between the user and the radio, at least 

 Page 

Summary of Contents for ADV0801




















































































Reviews: