Shining 3D EinScan Pro HD, Руководство пользователя

Страница: 118 / 138

SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.5 - User Manual –
Nov
2020 118
⭐
Notes:
●
If other option is selected The texture is not used to calculate the data
alignment.
●
Data and texture are captured from a different angle. In case of sharp edges,
texture-data can be misaligned, try to scan from a different angle.
Notice : If there are some missing texture areas after the texture project is generated
into point clouds, show as the picture below, it could be the reason that the data
scan is overlarge and your current PC configuration could not process it. You could
change to a computer with higher configuration to process and the project won’t be
damaged.
9.4.2. Texture matching
If the texture is misaligned to the data, check whether the texture camera is well
placed and locked. And redo the calibration.
If blue areas appear on the data (usually on the edge of the scan frame), it means the
texture information is missing at these areas, do another scan on the same area from
a different path.