Shining 3D EinScan HX, Руководство пользователя

Страница: 17 / 83

EinScan HX User Manual
16
3 Operation
3.1
Calibration
Each set of EinScan comes with a calibration board and a position paper for
calibration.
Calibration is a process of promoting device’s performance while recalculating its parameters to
ensure that both of its scanning accuracy and quality are over the VDI/VDE standards.
Follow the steps provided by the calibration wizard on the interface during the calibration.

To ensure a better accuracy of the device, around 30 mins warm-up is suggested before
calibration after clicking Calibration button. If no special request on the accuracy, just skip the
heating step and go straight to the calibration operation. Do not move or vibrate calibration
board during scanning.

EinScan HX applies safe low-energy laser during laser scan mode, which causes no harm to
human body such as eyes and skin under the normal operating situation. However, avoiding
direct eye-contacts with the laser beam and keeping the scanner away from children are still
commanded for your own safety.
3.1.1 Caution
EXScan system enters the calibration interface directly as being opened for the first time. Users can
also click Calibration on the navigation bar for switching to the calibration interface
manually.
Situations Requires Calibration:

Do the calibration when the scanner is connected for the first time.

It is recommended to do the calibration twice a week.

Do the calibration when the scanner having been keeping on idling for a long time.

Do the calibration after the scanner going through a bumpy transportation.

Do the calibration when there is a severe deterioration of accuracy or the misalignment occurs
frequently during the scanning.

Do the calibration when there are some errors in acquiring integrated high-quality data during
the scanning.