Shining 3D AccuFab L4D, Руководство по установке

Страница: 3 / 6

Put clean resin tank into the position. Lock the buckles for As the following picture shows, installation is completed.
Add Material
First Print
7） 8）
11
(There are four positioning slots)
resin tank.
Note that the resin level
of minimum and maximum.
Note: You can also add resin during printing without pausing.
Please refer to the “AccuFab-L4D Quick Start Guide” in the flash drive. The flash drive can be used for data transmission later on.
10
should be between the indicator lines
Shake for 2 mins before pouring material into the resin tank to
avoid sediment.
10
11