Shini STM-PW series, Руководство пользователя

Страница: 23 / 69

6.2 Machine Startup
Switch on
Switch off
Actual temperature
Set temperature
6-3
6. Operation Guide
1) Pipe connect the inlet and outlet of the
standard water heater to the pipe of mould
(refer to chapter 5.2 for details).
2) Connect the cooling water inlet /backup
water inlet (refer chapter 5.5.2 for details).
3) Turn all the ball valves on.
4) Turn on the main power switch.
5) Turn on the pump switch to start the pump.
6) Turn on the heater switch.
7) Set mould temperature (if it is already set, neglect this step.) Press
to set the temperature. For STM PW series, maximum
temperature setting value is 160 .
8) Overtemperature setup for system cooling: set as +1
before delivery
which means that whenever actual temperature exceeds setting value
by 1 , cooling system will be automatically activated.