Shini SG-14 Series, Руководство пользователя, Страница: 48 / 62

48(62)
4.
Operation Guide
Wear gloves during operating to avoid personal injury!
Wear goggles during operating to avoid personal injury!
4.1 Startup Pretest
Unpainted part of the machine has been covered with stainless oil. Before use,
the stainless oil should be cleaned.
1) Clean with a towel.
2) Wash with a towel dipping with amyl acetate.
4.1.1 Before the First Startup
1) Check whether the granulator is in the level state.
2) Check the space of the cutting tools to see whether the lockup screws of the
blades are tightened (torque: 280Nm).
Caution!
Adjust the machine to let its four castors share the whole weight and in
level state.
4.1.2 After Startup for 2 Hours
1) Check the space of the cutting tools of the fixed blades and rotating blades
again; check whether the lockup screws of the blades are loose.
2) Check the position-adjusting screws of the motor and check whether the
position-adjusting screws are tightened.
4.2 Circuit Connection
The installation of the granulator's circuit must be conducted by the professional
electricians.
1) Connect granulator to the power.
2) Connect the transmission belt clockwise.