Certain features of the Bathroom Assistant require a compatible mobile device and
active Shine App customer account. For example, scheduling toilet cleaning times
requires an active account and a compatible mobile device. The Shine Bathroom
Assistant requires a Wi-Fi Network and a compatible mobile device. Minimum OS
requirements are available at shop.shinebathroom.com/pages/req. Availability
and performance of certain features and services are service-, device-, and
network-dependent and may not be available in all areas. Subscription(s) may be
required, and additional terms, conditions and/or charges may apply. The Shine
notice or obligation. © Shine Bathroom Technologies, Inc. Shine Bathroom, Shine
Bathroom Assistant, SAM (Shine Automation Manager), and their respective logos
are trademarks of Shine Bathroom Technologies, Inc. Other trademarks and trade
names are those of their respective owners. All rights reserved. For compliance
individual country notices visit the following website
http://www.shinebathroom.com/compliance.
Operating Information:
Recommended Battery Charging Temperature Range:
5-35°C (Conducive to Cell Protection)
Product Temperature Range:
0 - 45°C (For Water Pump Operation)
Storage Temperature:
-10 - 60°C
to turn on the device.
On the side of the device, you’ll see two lock icons—
rotate the battery while holding the Assistant Body to line up the “unlocked”
rotate the battery pack back into the “locked” position. The device should light up
indicating it’s on and ready to pair.
5. Fill the Bathroom Assistant with water.
Using a measuring or drinking
cup, add 1,000 ml of water through the opening at the top. The water level should
be above the vents in the center column.
setup process.
You will complete the setup process by following the directions
in the app.
Setup Instructions
1. Remove the Bathroom Assistant and accessories from the box.
Carefully remove the packing materials, being careful not to pull on the Water
Sensor or Spray Bar as they’re attached to the Bathroom Assistant. Remove the
2. Place and install the Bathroom Assistant and Water Sensor (D).
You can place the Bathroom Assistant anywhere near your toilet, your only
limitation is the length of the Spray Bar tubing and Water Sensor cable. Take the
Water Sensor and clip it onto the outside of your toilet’s water inlet pipe (it’s the
Carefully wipe down the center backside of your toilet’s rim with the included
alcohol wipe. Let the area dry for at least 3 minutes before continuing.
3. Install the Spray Bar (C).
Peel away the backing on the double-sided tape
pressing the Spray Bar down on the rim of the toilet for
30 seconds
.
Optimal placement is the middle on the backside of your toilet rim (see black
oval in diagram).
You can place the Spray Bar anywhere in the back quarter of
the toilet bowl rim and still be effective.
SBA-09022020_revA
Support
Need help getting started? Have questions about your device?
Our team is ready to answer any questions and help get you
going with your Bathroom Assistant.
Email Us
Chat With Us
Available at www.shinebathroom.com
Call or Text Us
+1 (805) 272 - 7600
Call, Message, and Data rates may apply.
Mounts & Accessories
See the latest mounts and accessories for your Bathroom
Assistant by visiting www.shinebathroom.com today.
5
6
7
8
