manualshive.com logo in svg

Shindaiwa T302, Руководство оператора

Поделиться
Скачать
Shindaiwa T302 Скачать руководство пользователя страница 19

T302

OPERATION

X7502350700

19

© 4/2018 ECHO Inc.

ENGLISH

Fuel

Diesel fuels and alternative fuels, such as E15 (15% ethanol), 
E85 (85% ethanol) or any fuels not meeting Shindaiwa 
requirements are NOT approved for use in Shindaiwa 2-stroke 
or Hybrid 4-stroke gasoline engines. Use of diesel or alternative 
fuels may cause performance problems, loss of power, 
overheating, fuel vapor lock, and unintended machine 
operation, including, but not limited to, improper clutch 
engagement. Diesel or alternative fuels may also cause 
premature deterioration of fuel lines, gaskets, carburetors and 
other engine components.

Fuel Requirements

Gasoline

 - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to 

be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 
15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol 
(wood alcohol) is 

NOT

 approved. ECHO Red Armor Fuel

™

 (Power Fuel

™

) is 

93 octane, ethanol-free fuel premixed with ECHO Red Armor

®

 engine oil at 

50:1 ratio. Use of ECHO Red Armor Fuel

™

 (Power Fuel

™

) is recommended 

to extend engine life in all air-cooled 2-stroke and 2/4-stroke hybrid engines.

Two Stroke Oil

 - A two-stroke engine oil meeting ISO-L-EGD (ISO/CD 

13738) and J.A.S.O. FD Standards must be used. Shindaiwa brand 2-stroke 
oils meet these standards. Engine problems due to inadequate lubrication 
caused by failure to use an ISO-L-EGD (ISO/CD 13738) and J.A.S.O. 
M345-FD certified oil, such as Shindaiwa brand 2-stroke oils, will void the 
two-stroke engine warranty.

2-Stroke engine oil contains petroleum distillates and other 
additives that may be harmful if swallowed. Heated oil can 
release vapors that can cause flash fire, or ignite with explosive 
force. Read and follow the oil manufacturer’s instructions, and 
observe all safety warnings and precautions for handling 
flammable liquids. For more detailed safety and first aid 
information, visit www.echo-usa.com for a copy of the Material 
Safety Data Sheet.

◆

KEEP OUT OF REACH OF CHILDREN.

◆

If swallowed, do not induce vomiting. CALL PHYSICIAN OR 
A POISON CONTROL CENTER IMMEDIATELY.

Содержание T302













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды