manualshive.com logo in svg

Shindaiwa T242X, Руководство владельца/оператора, Страница: 3 / 36

Поделиться
Скачать
Shindaiwa T242X Скачать руководство пользователя страница 3

3

T242X Trimmer

Attention Statements

Throughout this manual are special “attention statements”.

CAUTION!

A statement preceded by the word “CAUTION” contains information that should be acted upon to 

prevent mechanical damage.

IMPORTANT!

A statement preceded by the word “IMPORTANT” is one that possesses special significance.

NOTE:

A statement preceded by the word “NOTE” contains information that is handy to know and may make your job 

easier.

DANGER!

A statement preceded by the triangular attention symbol and the word “DANGER” contains 

information that should be acted upon to prevent serious injury or death.

WARNING! 

A statement preceded by the triangular attention symbol and the word “WARNING” contains 

information that should be acted upon to prevent serious bodily injury.

Warning and Operational Labels

Read and follow this  operator's 

manual.  Failure to do so could 

 result in serious injury.

Wear eye and hearing protection 

at all times during operation of this 

unit. Wear head protection where 

there is a risk of falling objects.

Beware of thrown or 

richocheted objects

If unit is used as a brushcutter, 

beware of blade thrust. A jammed 

blade can cause the unit to jerk 

suddenly and may cause the 

operator to lose control of the unit.

Always wear a harness when 

operating this unit with a blade. 

A harness is also recommended 

when using trimmer line.

Make sure no one is 

within 15 m / 50 feet of 

an operating machine.

50 FEET

(15m

)

WARNING: 

Surface can 

be hot. Always wear gloves 

when handling this unit.

DO NOT 

operate this unit with a 

blade unless the unit is equipped 

with a Shindawia-approved 

handlebar or barrier.

8”

BARRIER

Содержание T242X





































Отзывы:

Нет отзывов