The
shindaiwa RS76 & RS76S
was factory calibrated, however, calibration should be checked occasionally
to assure optimum performance.
1.
Pull the on/off lever to the
“OFF”
position.
Set the rate control plate to setting
“B”
.
2.
Flip
on/off
control lever to the
“ON”
position.
Check the port opening. It should be just open. If
adjustment is necessary, continue to step #3.
3.
Loosen the rate control knob and slide the rate
plate until the port is just opening. Loosen pointer
screw and move pointer until it aligns with “B” on
the rate plate. Retighten pointer screw.
B C DEFGH I J K L M N O P Q R S
VIEW IS
INSIDE OF
HOPPER
Port is just
open
Pointer
Pointer Screw
Rate Control Plate
Rate Control Knob
Shindaiwa manufactures its products to superior quality standards of quality to ensure customers obtain the highest
level of satisfaction. In keeping with this goal, Shindaiwa warrants the unit to the original purchaser as follows:
Warranty Period
Two years from the delivery date to the original purchaser for consumer and commercial applications, 90 days for
rental applications.
Warranty Administration
Within the covered warranty period, Shindaiwa will, at their option, repair or replace any defect in material or
workmanship, without charge for parts or labor, if this product is presented at an authorizes Shindaiwa dealer.
Warranty Exclusions and Limitations
Shindaiwa Inc. assumes no responsibility for damages, loss, or injury resulting from:
• Normal wear and tear.
• Misuse or neglect.
• Modification to or removal of original component parts.
The warranty is limited to the terms stated herein. Shindaiwa disclaims all liability for incidental or consequential
damages. Some states do not allow the exclusion of incidental or consequential damages, so these limitations
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which may
vary from state to state. Shindaiwa reserves the right to change the design or specifications of this product without
obligation to modify previously manufactured products.
Owner’s Responsibilities
The owner of the unit must demonstrate reasonable care in the use, maintenance, and storage of this Shindaiwa
product. If a warrantable failure should occur, the owner must deliver the product to an authorized Shindaiwa servicing
dealer for correction. All residual chemicals must be removed from the hopper prior to delivery.
Unidentified chemicals left in tank can pose a serious health threat to anyone servicing the unit and unaware
of its presence!
To obtain warranty service, proof of purchase must be presented to the authorized Shindaiwa servicing dealer when
the product is presented for repairs.
Proof of purchase must include date of purchase and the name and address of the selling dealer.
shindaiwa LIMITED WARRANTY
CALIBRATION INSTRUCTIONS
Содержание RS76
Страница 1: ...Model RS76 Model RS76S COMMERCIAL BROADCAST SPREADER Owner s Manual 2 15 17 P15525 1...
Страница 8: ......