manualshive.com logo in svg

Shindaiwa PS262, Руководство оператора

Поделиться
Скачать
Shindaiwa PS262 Скачать руководство пользователя страница 21

T262

OPERATION

X7502342100

21

© 4/2017 ECHO Inc.

ENGLISH

2.

Choke

Move choke (B) to COLD 
START (

) (CLOSED) 

position.

3.

Purge Bulb

Pump purge bulb (C) until fuel 
is visible and flows freely in 
the clear fuel tank return line. 
Pump bulb an additional 4 or 
5 times.

4.

Recoil Starter

Lay the unit on a flat area and 
keep movable attachment 
parts clear of all obstacles. 
Firmly grasp throttle handle 
and throttle trigger lockout 
with left hand and fully 
depress throttle trigger to 
wide open position. Rapidly 
pull recoil starter handle/rope 
(D) until engine fires (or 
maximum five [5] pulls).

5.

Choke

After engine fires (or 5 pulls), move choke (B) to the RUN          (

) 

(OPEN) position. Firmly grasp throttle handle and throttle trigger lockout 
with left hand and fully depress throttle trigger to wide open position. Pull 
starter handle/rope until engine starts and runs. Release throttle trigger 
and allow unit to warm up at idle for several minutes. 

Note: If engine does not start with choke in “Run” position after 5 

pulls, repeat instructions 2 - 5.

6.

Throttle Trigger

After engine warm-up, grip throttle handle and support handle. Depress 
the throttle trigger lockout, and gradually depress throttle trigger to 
increase engine RPM to operating speed.

Starting Warm Engine

The starting procedure is the same as Cold Start except DO NOT close the 
choke, and do not hold throttle trigger fully depressed.

B

C

D

Содержание PS262













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды