LE262
OPERATION
X7502341501
21
© 03/2019 ECHO Inc.
2.
Choke
Move choke (B) to COLD START
(
) (CLOSED) position.
3.
Purge Bulb
Pump purge bulb (C) until fuel is
visible and flows freely in the clear
fuel tank return line. Pump bulb an
additional 4 or 5 times.
4.
Recoil Starter
Lay the unit on a flat area and
keep movable attachment parts
clear of all obstacles. Firmly grasp
throttle handle and throttle trigger
lockout with left hand and fully
depress throttle trigger to wide
open position. Rapidly pull recoil
starter handle/rope (D) until
engine fires (or maximum five [5]
pulls).
5.
Choke
After engine fires (or 5 pulls), move choke (B) to the RUN (
) (OPEN)
position. Firmly grasp throttle handle and throttle trigger lockout with left
hand and fully depress throttle trigger to wide open position. Pull starter
handle/rope until engine starts and runs. Release throttle trigger and
allow unit to warm up at idle for several minutes.
Note: If engine does not start with choke in “Run” position after 5
pulls, repeat instructions 2 - 5.
6.
Throttle Trigger
After engine warm-up, grip throttle handle and support handle. Depress
the throttle trigger lockout, and gradually depress throttle trigger to
increase engine RPM to operating speed.
C
B
D
