background image

3

 WARNING!

Use Good Judgment

ALWAYS

 wear eye protection to shield 

against thrown objects.

NEVER

 run the engine when transport-

ing the unit.

NEVER

 run the engine indoors! Make 

sure there is always good ventilation. 

Fumes from engine exhaust can cause 

serious injury or death.

ALWAYS

 clear your work area of trash 

or hidden debris that could be thrown 

back at you or toward a bystander.

ALWAYS

 stop the machine immedi-

ately if it suddenly begins to vibrate or 

shake. Inspect for broken, missing or 

improperly installed parts or attach-

ments.

ALWAYS

 keep the unit as clean as 

practical. Keep it free of loose vegeta-

tion, mud, etc.

ALWAYS

 hold the unit firmly with both 

hands when cutting or trimming, and 

maintain control at all times.

ALWAYS

 keep the handles clean.

ALWAYS

 disconnect the spark plug 

wire before performing any mainte-

nance work.

Stay Alert

You must be physically and mentally fit to 

operate this unit safely. 

General Safety Instructions

 WARNING!

The engine exhaust from this product 

contains chemicals known to the State 

of California to cause cancer, birth  

defects or other reproductive harm.

The Properly Equipped Operator

AlwAys operate with 

both hands firmly gripping 

the unit.

Wear close-fitting clothing to 

protect legs and arms. Gloves 

offer added protection and are 

strongly recommended. Do 

not wear clothing or jewelry 

that could get caught in  

machinery or

underbrush. 

Secure hair so it is 

above shoulder 

level. 

NEVER 

wear shorts!

Wear hearing protection devices 

and a broad-brimmed hat or 

helmet.

AlwAys wear eye protection such 

as goggles or safety glasses.

Keep away from the rotating  

cutting attachment at all times, 

and never lift a moving  

attachment above waist-high.

Wear appropriate footwear (non-skid 

boots or shoes): do not wear open-toed 

shoes or sandals.

 NEVER operate the 

unit while barefoot!

Keep a proper  

footing and 

do not 

overreach.  

Maintain your 

balance at all times 

during operation.

AlwAys make 

sure the appropriate 

cutting attachment 

shield is correctly 

installed and in good 

condition.

Figure 1

Содержание LE261





















Отзывы: