manualshive.com logo in svg

Shindaiwa LE235, Руководство оператора


Поделиться
Скачать
background image

SAFETY

LE235

12

X7732272902

© 09/19 ECHO Incorporated

Equipment

Use only Shindaiwa attachments. Serious injury may result from 
the use of a non-approved attachment combination. ECHO, INC. 
will not be responsible for the failure of cutting devices, 
attachments or accessories which have not been tested and 
approved by ECHO. Read and comply with all safety 
instructions listed in this manual and safety manual.

◆

Check unit for loose/missing nuts, bolts, and screws. 
Tighten and/or replace as needed.

◆

Inspect shield for damage and that shield is securely in 
place. Replace if shield is damaged or missing.

◆

Check that the cutting attachment is firmly attached and in 
safe operating condition.

◆

Check that support handle is adjusted for safe, 
comfortable operation. See Assembly Section for proper 
adjustment.

Moving parts can amputate fingers or cause severe injuries. 
Keep hands, clothing and loose objects away from all openings.

◆

ALWAYS stop engine, disconnect spark plug, and make 
sure all moving parts have come to a complete stop before 
removing obstructions, clearing debris, or servicing unit.

◆

DO NOT start or operate unit unless all guards and 
protective covers are properly assembled to unit.

◆

NEVER reach into any opening while the engine is running. 
Moving parts may not be visible through openings.

Periodically Check fuel system (fuel lines, vent, grommet, fuel 
tank, and fuel cap) for leaks especially if the unit is dropped. If 
damage or leaks are found, do not use unit, otherwise serious 
personal injury or property damage may occur. Have unit 
repaired by an authorized servicing dealer before using.

Содержание LE235









































Отзывы:

Нет отзывов

Похожие инструкции для LE235

RedMax HE225F Owner'S Manual preview
HE225F
Бренд: RedMax Страницы: 56

Бренды по названию

Популярные бренды

Загрузить еще бренды