Shindaiwa HT254 Скачать руководство пользователя

Страница: 3 / 24

Work Safely

Shindaiwa hedge trimmers operate at

very high speeds and can do serious

damage or injury if they are misused

or abused.

Never allow a person without

training or instruction to operate your unit!

Stay Alert

You must be physically and mentally fit to

operate this unit safely.

WARNING!

Never operate power

equipment of any kind if you are tired

or if you are under the influence of al

cohol, drugs, medication or any other

substance that could affect your abil-

ity or judgement.

DO NOT OPERATE THIS UNIT

IF YOU ARE TIRED, ILL OR

UNDER THE INFLUENCE OF

ALCOHOL, DRUGS, OR

MEDICATION.

WARNING!

Never make unauthorized attach-

ment installations.

Avoid using or storing this

unit in a wet environment.

Water on the cutters may

enter the gearcase and

damage your unit.

Always wear eye, ear,

and hand protection while

operating this unit!

Always wear close-fitting clothing. Gloves offer

added protection and are strongly recommended.

Do not wear clothing or jewelry that could get

caught in machinery.

Always keep proper footing and do not

overreach. Maintain your balance at all

times during operation.

Use extreme caution when

operating near fences or

electric wiring.

Never cut metal objects or

wire with the blade.

Never operate this unit if

the safety guard has been

removed or damaged!

Never allow children to use

the unit. Avoid operating near

bystanders.

Always stop the engine

and install the blade cover

before moving to another

work site, and maintain a

firm footing while operating

or carrying the trimmer.

Always stop the

engine

before

removing branches

or debris from the

cutters! Never allow

the cutters to contact

buildings or other

hard objects!

Avoid cutting large or extremely

“woody” branches. Doing so can

shorten cutter life, and may also

damage the gearcase.

WORK SAFELY!

Figure 1

Always grip support

handle with right hand

and throttle handle with

left hand..

General Safety Instructions

WARNING!

Minimize the Risk of Fire!

ALWAY

S check unit for fuel leaks

before use. Check for leaks around

fuel tank cap while refueling. If fuel

leaks are found immediately stop

using the unit. Fuel leaks must be

repaired before using unit.

ALWAYS

move the unit to a place

well away from a fuel storage area

or other readily flammable materials

before starting the engine.

Содержание HT254

























Результаты поиска

Содержание HT254

Отзывы:

Похожие инструкции для HT254

Бренды по названию

Популярные бренды

Shindaiwa HT254, Руководство владельца/оператора

Результаты поиска

Содержание HT254

Отзывы:

Похожие инструкции для HT254

Бренды по названию

Популярные бренды