Shindaiwa HomePro 76RS Скачать руководство пользователя страница 7

MAINTENANCE

WARRANTY

Never store unused material in spreader. Return 

1. 

unused product to its original container.

Wash spreader thoroughly after each use and 

2. 

dry completely in sun or heated area. 
Oil the axle bearings, impeller shaft bearing 

3. 

in hopper, control knob in  T-handle. 

Remove gear cover and wash gears thoroughly. 

4. 

Oil all bearing areas and face of gear teeth. 

Re-install gear cover.

Gear mesh should be checked on a regular basis 

5. 

during high use periods. Clearance between the  

axle gear and pinion gear should be minimal but 

not tight. If adjustment is necessary, loosen axle 

collar set screw and hold gears together. Slide 

axle collar against the gear support and tighten 

axle collar set screw. Spin drive wheel. Gears 

should run freely and smoothly.

Impeller surface should be cleaned periodically to 

6. 

remove build-up of product. Build-up can cause the 

spread pattern to change.

Tire pressure should be 20-25 PSI.

7. 

Oil 

Oil Impeller Shaft  

Bearing In Hopper 

Oil 

Axle Collar 

Oil

Oil 

Shindaiwa Inc. manufactures its products to superior standards of quality to ensure customers obtain the highest level of satisfaction. In 

keeping with this goal, Shindaiwa Inc. warrants the unit to the original purchaser as follows:

WARRANTY PERIOD

  One year from the delivery date to the original purchaser for consumer and commercial applications.90 days for rental applications.

WARRANTY ADMINISTRATION

  Within the covered warranty period, Shindaiwa Inc. will, at their option, repair or replace any defect in material or workmanship, without 

charge for parts or labor, if this product is presented at an authorized Shindaiwa dealer.

WARRANTY EXCLUSIONS AND LIMITATIONS

Shindaiwa Inc. assumes no responsibility for damages, loss, or injury resulting from:

  Normal wear and tear

  Misuse or neglect 

  Modifications to or removal of original component parts

  The warranty is limited to the terms stated herein. Shindaiwa Inc. disclaims all liability for incidental or consequential damages. Some 

states do not allow the exclusion of incidental or consequential damages, so these limitations may not apply to you.

  This warranty give you specific legal rights, and you may also have other rights which may vary from state to state.

  Shindaiwa reserves the right to change the design or specifications of this product without obligation to modify previously manufac-

tured products.

OWNER’S RESPONSIBILITIES

  The owner of the unit must demonstrate reasonable care in the use, maintenance, and storage of this Shindaiwa product. If a warrant-

able failure should occur, the owner must deliver the product to an authorized Shindaiwa servicing dealer for correction. All residual chem-

icals must be flushed from the tank prior to delivery. 

Unidentified chemicals left in the tank can pose a serious health threat to anyone servicing the unit and unaware of its 

presence!

  To obtain warranty service, proof of purchase must be presented to the authorized Shindaiwa servicing dealer when the product is

presented for repairs.

  Proof of purchase must include date of purchase and the name and address of the selling dealer. 

Содержание HomePro 76RS









Отзывы: