Shindaiwa HomePro 22DH series Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 28

Shindaiwa HomePro 22DH series Скачать руководство пользователя страница 13

13

5. Place the machine on the ground.

Grip the engine cover with your left
hand and the starter handle with
your right hand. See Figure 12.

6. Pull the starter handle slowly

toward you until you feel the starter
mechanism engage.

7. Start the trimmer by pulling the

starting handle rapidly outward.

Choke

Open

Figure 12

Choke

Closed

Figure 11

4. (Cold Engine Only)

Move the choke lever forward to
the “closed” position to choke the
engine. See Figure 11.

Figure 13

When the engine starts or fires–

WARNING!

The cutting attachment will move
when the engine accelerates!

CAUTION!

Do not pull the recoil starter to the
end of the rope travel. Pulling the
recoil starter to the end of the rope
travel can damage the starter.

8. Open the choke by moving the

choke lever backward toward the
fuel tank, if it isn't open already.
See Figure 13.

9. If the engine does not continue to

run, repeat the appropriate starting
procedures for a cold or warm
engine.

10.When the engine starts, clear

excess fuel from the combustion
chamber by accelerating the engine
several times with the throttle
lever.

11.Operating the throttle will automati-

cally disengage the fast idle setting.

If the engine does not start–

■

Repeat the appropriate starting
procedure for a cold or warm
engine.

■

If the engine still fails to start, use
the procedures for “Starting a
Flooded Engine,” (next page).

OPERATION

Starting The Engine (cont.)

«
...
11
12
13
14
15
...
»

Содержание HomePro 22DH series





























Отзывы:

Нет отзывов