Shindaiwa EB508RT Скачать руководство пользователя страница 10

10

NOTICE:

 Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor 

performance, or severe engine damage and void the product warranty. Read and follow instructions in the Storage 

section of this manual.

fuel

  

  WARNING  

Alternative fuels, such as E-15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting Shindaiwa requirements 

are 

NOT

 approved for use in Shindaiwa 2-stroke gasoline engines.  Use of alternative fuels may cause performance 

problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited 

to, improper clutch engagement.  Alternative fuels may also cause premature deterioration of fuel lines, gaskets, 

carburetors and other engine components.

 

Fuel Requirements 

Gasoline - 

Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 

10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood alcohol) 

is 

NOT

 approved.

For increased engine protection, Shindaiwa recommends using Shindaiwa Red Armor

TM

 engine oil to protect the engine 

from harmful carbon build up, maintain engine performance, and increase engine life. Shindaiwa Red Armor

TM

 engine 

oil exceeds ISO-L-EGD and J.A.S.O. M345/FD performance requirements. 

IMPORTANT 

Shindaiwa One

TM

 2-Stroke oil or Red Armor

TM

 engine oil may be mixed at 50:1 ratio for application in all Shin-

daiwa engines sold in the past, regardless of ratio specified in those manuals.

IMPORTANT

Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30)  days, ninety (90) days when a fuel 

stabilizer is added. Use of unmixed, improperly mixed, or stale fuel, may cause hard starting, poor performance, 

or severe engine damage and void the product warranty. Read and follow instructions in the Long Term Storage 

section of this manual. 

o

peraTIon

  

  WARNING

Operation of this equipment may create sparks that can start fires. This unit is equipped with a spark arrestor to 

prevent discharge of hot particles from the engine. Metal blade use also can create sparks if the blade strikes rocks, 

metal, or other hard objects. Contact local fire authorities for laws or regulations regarding fire prevention require-

ments.

 

 

WARNING

Moving parts can amputate fingers or cause severe injuries.  Keep hands, clothing and loose objects away from all 

openings.  Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop 

before removing obstructions, clearing debris, or servicing unit. Blower housing may contain shredder blades and 

other sharp edges that can cause serious injuries if touched, even if engine is off and blades are not moving.  Wear 

gloves to protect hands from sharp edges and hot surfaces. 

Содержание EB508RT





























Отзывы: