background image

23

PURCHASED REPAIR PARTS AND ACCESSORIES

•  90-day all applications

ATTENTION ENGINE POWERED PRODUCT OWNERS

This Shindaiwa engine powered product is a quality-engineered unit which has been manufactured to exact tolerances to provide superior 

performance.  To help ensure the performance of the unit, it is required to use engine oil which meets the ISO-L-EGD Standard per 

ISO/CD 13738 and JASO M345/FD Standards.

  

Shindaiwa Red Armor

TM

   

and Shindaiwa One

TM

  are a premium engine oil specifically 

formulated to meet ISO-L-EGD (ISO/CD 13738) and JASO M345/FD Standards.  The use of engine oils designed for other applications, 

such as for outboard motors or lawnmowers can result in severe engine damage, and will void your engine limited warranty. 

THIS WARRANTY DOES NOT COVER DAMAGE CAUSED BY:

• 

Lack of lubrication or engine failure, due to the use of engine oils 

that do not meet the ISO-L-EGD (ISO/CD 13738) and JASO 

M345/FD Standards.

 

Shindaiwa ONE

TM

 Engine Oil

 

meets the ISO-L-EGD and JASO M345/FD  Standard. Emission related parts 

are covered for 2 years regardless of engine oil used, per the statement listed in the EPA or California Emission Control Warranty 

Explanation. 

• 

Damage caused by use of gasohol, containing methanol (wood alcohol), or gasoline containing 

less than 89 octane.  Only use 

gasoline which contains 89 octane or higher. Gasohol which contains a 

maximum

 10% ethanol (grain alcohol) or 15% MTBE (methyl/

tertiary/butyl/ether) is also approved. The prescribed mixing ratio of gasoline to oil is listed on the Shindaiwa oil label and covered 

in your operator’s manual.

• 

Engine damage caused by use of ether or any starting fluids.  

• 

Damage  caused  by  tampering  with  engine  speed  governor  or  emission  components,  or  running  engines  above  specified  and 

recommended engine speeds as listed in your operator’s manual.

• 

Operation of the unit with improperly maintained/removed cutting shield or removed/damaged air filter.  

• 

Damage caused by dirt, pressure or steam cleaning the unit, salt water, corrosion, rust, varnish, abrasives, and moisture.

• 

Defects, malfunctions or failures resulting from abuse, misuse, neglect, modifications, alterations, normal wear, improper servicing, 

or use of unauthorized attachments. 

• 

Incorrect storage procedures, stale fuel, including failure to provide or perform required maintenance services as prescribed in the 

operator's manual.  Preventative maintenance as outlined in the operators manual is the customer’s responsibility.

• 

Failures due to improper set-up, pre-delivery service or repair service by anyone other than authorized Shindaiwa servicing dealer 

during the warranty period.

• 

Certain 

parts and other items are not warranted, including but not limited to: lubricants, starter cords, and engine tune-ups. 

• 

Use of spark plugs other than those meeting performance and durability requirements of the OEM spark plug listed in the Operator's 

Manuals.

• 

Overheating or carbon scoring failures due to restricted, clogged exhaust port or combustion chamber, including damage to spark 

arrester screen.

• 

Adjustments after the first (30) thirty days and beyond, such as carburetor adjustment and throttle cable adjustment.

• 

Damage to gears or gear cases caused by contaminated grease or oil, use of incorrect type or viscosity of lubricants, and/or failure 

to comply with recommended grease or oil change intervals.

• 

Damage  caused  by  pump  or  sprayer  running  dry,  pumping  or  spraying  caustic  or  flammable  materials,  or  lack  of  or  broken 

strainers. 

• 

Additional damage to parts or components due to continued use after operational problem or failure occurs. Should operational 

problem or failure occur, the product should not be used, but delivered as is to an authorized Shindaiwa servicing dealer.

It is a dealer’s and/or customer’s responsibility to complete and return the warranty registration card supplied with your Shindaiwa 

product or by visiting WWW.SHINDAIWA.COM. your receipt of purchase including date, model and serial number must be maintained 

and presented to an authorized Shindaiwa servicing dealer for warranty service. Proof of purchase rests solely with the customer. Some 

states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Some states do not 

allow the exclusion or limitation of incidental or consequential damages, so you may also have other specific legal rights which vary from 

state to state. This limited warranty is given by ECHO Incorporated, 400 Oakwood Rd., Lake Zurich, IL 60047.

DISCLAIMER OF IMPLIED WARRANTIES

This limited warranty is in lieu of all other expressed or implied warranties, including any warranty of FITNESS FOR A PARTICULAR 

PURPOSE OR USE and any implied warranty of 

MERCHANTABILITY

 otherwise applicable to this product. ECHO, INC. and its affiliated 

companies shall not be liable for any special incidental or consequential damage, including lost profits.  There are no warranties extended 

other than as provided herein. This limited warranty may be modified only by ECHO, INC.

99922201031

02/05/2010

Содержание EB344





























Отзывы: