Shindaiwa DG15BMK, Руководство владельца и оператора

Страница: 17 / 52

12
5-1. Spill Containment
Warning: Fire

Always be sure to wipe away any spilled fuel or oil.

Spilled fuel and oil accumulates in the spill containment. Do not operate the
equipment with fluids accumulated in the spill containment.

Do not use the equipment if there is a fuel, oil or coolant leak, and be sure to
always repair the leak before using.
The equipment includes a spill containment (a structure that collects leaking fluids) in
order to prevent leaking fluid from getting outside of the equipment if oil, fuel or other
fluids should leak.
Before starting operation, check if there is any fluid accumulated in the spill containment
and drain any accumulated fluids.
（
Refer to section "10. (7) Drain fluid from the Spill
Containment" .
）
<Note>

It is necessary to periodically drain the fluid from the spill containment because any
rainwater induced into the equipment accumulates in the spill containment.

Although the fluids consist of oil, fuel and coolant, the spill containment does not have a
function that can separate rainwater leaked into the equipment from these internally
leaked fluids. Properly dispose of fluids from the spill containment according to the
applicable federal laws and regulations.
5-2. Multi digital meter
The equipment includes a meter that provides digital display of voltage, current, operating
time and frequency.
The meter is equipped with meter selector that can be switched to display voltage, current,
operating time or frequency.
<Note>

During operation, the 3-phase output voltage of the AC power source is constantly
displayed regardless of whether the 3-phase circuit breaker is set to "ON" or "OFF".
5. Equipment
Multi digital
Meter
Meter Selector
Rotating indication by selector
Voltage
Current
Hour
Frequency