Shindaiwa C360T, Руководство оператора

Страница: 22 / 132

20
Maintenance and care
Maintenance and care
Servicing guidelines
Maintenance and care
WARNING
Observe the following precautions when checking and maintaining your product after use:
 Turn the engine off and do not attempt to check or maintain the product until the engine has cooled.
You could burn yourself.
 Remove the spark plug cap before performing checks and maintenance.
An accident could occur if the product starts unexpectedly.
IMPORTANT
 Checking and maintenance requires specialist knowledge. If you are unable to check and maintain the product or deal with a
fault yourself, consult your dealer. Do not attempt to dismantle the product.
Area Maintenance Page Before use Monthly
Air filter Clean/Replace 21 •
Fuel filter Inspect/Clean/Replace 21 •
Spark plug Inspect/Clean/Adjust/Replace 23 •
Carburettor Adjust/Replace and adjust 21 •
Cooling system Inspect/Clean 22 •
Silencer Inspect/Tighten 22 •
Silencer Clean 22 •**
Angle transmission Grease 23 •*
Starter Inspect - •
Cut off knife Inspect/Clean - •
Fuel system Inspect 21 •
Screws, bolts and nuts Inspect, Tighten/Replace - •
* Or 50 hours, whichever occurs first. ** Or 100 hours, whichever occurs first.
Area Maintenance
Valve clearance Adjust
If pulling on the starter grip is difficult or power is low, consult
your dealer.
IMPORTANT
 Time intervals are maximum. Actual use and your experience will determine the frequency of required maintenance.
If you have any questions or problems, please contact your dealer.