manualshive.com logo in svg

Shindaiwa C242, Руководство владельца/оператора, Страница: 5 / 40

Поделиться
Скачать
Shindaiwa C242 Скачать руководство пользователя страница 5

5

C242 Brushcutter

Equipment

WARNING! 

Use only ECHO Inc. attachments. Serious injury may result from the use of a non-approved 

attachment combination. ECHO Inc. will not be responsible for the failure of cutting devices, attachments 

or accessories which have not been tested and approved by ECHO Inc. Read and comply with all safety 

instructions listed in this manual.

 

■

Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed.

 

■

Inspect the debris shield for damage and ensure that the cut-off knife is securely in place. Replace if 

either is damaged or missing.

 

■

Check that the cutting attachment is firmly attached and in safe operating condition.

 

■

Check that the handle(s) and harness (if included) are adjusted for safe, comfortable operation. See 

Assembly section for proper adjustment.

 

■

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects 

away from all openings.

 

■

ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a com-

plete stop before removing obstructions, clearing debris, or servicing unit.

 

■

DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.

 

■

NEVER reach into any opening while the engine is running. Moving parts may not be visible through 

openings.

 

■

Check fuel system for leaks due to fuel tank damage, especially if the unit is dropped. If damage or 

leaks are found, do not use unit, otherwise serious personal injury or property damage may occur. 

Have unit repaired by an authorized servicing dealer before using.

Read the Manuals 

Provide all users of this equipment with the Operator’s Manual for 

instructions on Safe Operation.

Clear the Work Area

Spectators and fellow workers must be warned, and children and 

animals prevented from coming nearer than 15 m (50 ft.) while the unit 

is in use.

Keep a Firm Grip

Hold both handles with thumbs and fingers encircling the grips.

Keep a Solid Stance

Maintain footing and balance at all times. Do not stand on slippery, 

uneven or unstable surfaces. Do not work in odd positions or on 

ladders. Do not over reach.

DANGER! 

All over head electrical conductors and communications wires can have electricity flow with high 

voltages. This unit is not insulated against electrical current. Never touch wires directly or indirectly, 

otherwise serious injury or death may result.

Safety Instructions

Содержание C242









































Отзывы:

Нет отзывов