Shindaiwa AHS262 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 48

background image

AHS262

OPERATION

X7502342403

19

© 08/21 ECHO Incorporated

Fuel

Diesel fuels and alternative fuels, such as E15 (15% ethanol),
E85 (85% ethanol) or any fuels not meeting Shindaiwa
requirements are NOT approved for use in Shindaiwa 2-stroke
or Hybrid 4-stroke gasoline engines. Use of diesel or alternative
fuels may cause performance problems, loss of power,
overheating, fuel vapor lock, and unintended machine
operation, including, but not limited to, improper clutch
engagement. Diesel or alternative fuels may also cause
premature deterioration of fuel lines, gaskets, carburetors and
other engine components.

Fuel Requirements

Gasoline

- Use fresh (purchased within the last 30 days from the pump) 89

Octane [R+M/2] (mid grade or higher) gasoline known to be good quality.

Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE

(methyl tertiary-butyl ether). Gasoline containing methanol (wood alcohol) is

NOT

approved. Use of ECHO branded fuel is recommended to extend

engine life in all air-cooled 2-stroke and 2/4-stroke hybrid engines.

Two Stroke Oil

- A 2-stroke engine oil, such as Shindaiwa branded 2-stroke

oils, meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FD Standards must

be used. Shindaiwa branded 2-stroke oils meet these standards. Engine

problems due to inadequate lubrication caused by failure to use an ISO-L-

EGD (ISO/CD 13738) and J.A.S.O. M345-FD certified oil will void the 2-

stroke engine warranty.

2-Stroke engine oil contains petroleum distillates and other
additives that may be harmful if swallowed. Heated oil can
release vapors that can cause flash fire, or ignite with explosive
force. Read and follow the oil manufacturer’s instructions, and
observe all safety warnings and precautions for handling
flammable liquids. For more detailed safety and first aid
information, visit www.echo-usa.com for a copy of the Material
Safety Data Sheet.

◆

KEEP OUT OF REACH OF CHILDREN.

◆

If swallowed, do not induce vomiting. CALL PHYSICIAN OR
A POISON CONTROL CENTER IMMEDIATELY.

«
...
17
18
19
20
21
...
»

Содержание AHS262

















































Отзывы:

Нет отзывов

Похожие инструкции для AHS262

Бренд: Wahl Страницы: 20

Бренд: Worx Страницы: 160

Бренд: elsner elektronik Страницы: 2

SRM-230 - 10-05

Бренд: Echo Страницы: 28

Бренд: Toro Страницы: 44

Бренд: Yard-Man Страницы: 56

Бренд: CRAIN Страницы: 2

Maestro Wireless MRF2-3LD

Бренд: Lutron Electronics Страницы: 11

Бренд: Mi-Heat Heizsysteme Страницы: 4

Бренд: Blaupunkt Страницы: 16

Бренд: Rebel TOOLS Страницы: 125

Бренд: Dolmar Страницы: 56

Бренд: Texas Equipment Страницы: 20

Бренд: Leviton Страницы: 16

Бренд: MTD Страницы: 16

Бренд: MTD Страницы: 25

Бренд: Martin Yale Страницы: 15

4rtists LO-PRO FX FX726E

Бренд: BaBylissPro Страницы: 120

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды