340S
DESCRIPTION
© 8/2015 ECHO Inc.
X7503274701
15
Preparation For Use
Saw chain is sharp! Always wear gloves when handling assembly, otherwise serious personal injury
may result.
Note: The machine may be delivered with guide bar, tip guard, and
saw chain separated. Install guide bar, tip guard, and saw
chain as follows.
Tip Guard to Bar Instructions
Tools Needed: Adjustable wrench.
For saws with tip guard P/N 2894901 and Symmetrical or
Asymmetrical Low-Kick type (Double Guard) guide bars:
1. Install 1/4 - 28 bolt in
large
hole of tip guard and through
front
large
hole in guide bar.
2.
IMPORTANT:
Dimple (A) in tip guard must engage recess (B)
in guide bar.
3. Securely tighten nut and bolt.
For saws with tip guard P/N 2894901 and Symmetrical or
Asymmetrical Low-Kick type (Pro-Lite) guide bars:
1. Install 8-32 bolt in
small
hole of tip guard and through
small
hole in center of bar nose.
2.
IMPORTANT:
Dimple (A) in tip guard must engage recess (B) in guide bar.
3. Securely tighten nut and bolt.
Guide Bar and Saw Chain Installation/Removal
1. Release the cylinder cover latches, and remove the cylinder
cover.
2. Remove spark plug lead.
For more information
scan this QR code.
A
B
For more information
scan this QR code.
