Cooling mode
When the A/C enters cooling mode automatically or cooling mode is selected after
power ON, the cooling indicator lamp lights up.
Press Up/Down key to adjust setting temperature (61
℉
~86
℉
).
Press Speed key to choose High/Low speed.
Fan mode
When pressing mode key or choosing Fan mode by pressing the remote controller,
the wind indicator lamp lights up.
Press Speed key to choose High/Low speed.
Temperature can’t be set.
Dehumidification mode
When pressing mode key or choosing dehumidification
mode by pressing the remote controller, the
dehumidification indicator lamp lights up.
Remove the dehumidification water wedge, insert water
manifold, place the other end of the water manifold into
the water vessel or drainage passage, as shown in the
right figure.
In dehumidification mode, the fan is defaulted to run at low speed, and wind speed
can’t be adjusted.
Temperature can’t be set.
（
Note : when use dehumidify function, should remove
exit pipe components, otherwise, it will cause worse dehumidify performance,
and appear “FL” water full alarm
）
Sleep mode (optional function)
Under cool mode,
pressing sleep mode key on the remote controller or pressing time
key and down key together on the machine, it will start sleep mode with low wind
speed and can’t be adjusted.Pressing the sleep mode key again or pressing time key
and down key together on the machine to quit the sleep mode.
If yor press the wind speed key under the sleep mode,the screen will display”SL”
Timer mode
In standby state, press the Timer key to set ON time. Press Up and Down keys to set
ON time (0~24H), and the timer indicator lamp lights up.
In ON state, pressure the timer key to set OFF time. Press Up and Down keys to set
OFF time (0~24H), and the timer indicator lamp lights up.
OPERATION METHOD
