Shinco SDZ1-70P/P, Руководство пользователя

Страница: 6 / 16

•
Before moving the appliance,the water tank should be emptied.
•
The handle on the appliance is designed to aid in its movement and should not be used to
support the full weight of the dehumidifier. When carrying the unit, it should be kept upright
and sufficiently supported from its base.
•
The appliance must be placed in a room without sources of ignition (for example: open
flames, an operating gas appliance or an operating electric heater).
•
Do not use or store the appliance in an unventilated space with an area smaller than 43 sq.ft
(4m 2 )per unit.
•
If the appliance is installed, used or stored in an unventilated room, the room must be such
as to prevent stagnation of possible leaks of refrigerant gas as there could be a danger of fire
or explosion once the refrigerant comes into contact with electric heaters, stoves or other
sources of ignition.
•
Do not use the product and contact the retailer for advice, if damage has occurred to the unit
which may have compromised the refrigerant system.
•
Any repairs or maintenance must only be carried out on the unit by a suitably qualified
engineer.Before opening and servicing the unit,the authorized engineer must be in
possession of a copy of the manufacturer’s service manual and must follow the safety
information contained within it to ensure all hazards are minimized.
•
The refrigerant system should not be perforated or punctured.
•
Do not place the unit next to heat sources (e.g. electrical fires, fireplaces, etc.)
•
Avoid mishandling the dehumidifier. Dropping, throwing the unit can cause damage to its
internals and increases the risks of operating it.
•
Do not store or use gasoline, petrol, paint, solvents or other flammable vapours or liquids in
the vicinity of this dehumidifier or any other appliance.
•
This dehumidifier must not be used in spaces where there is a high concentration of gases,
solvent or other volatile organic compounds; in very dusty environments; in any domestic,
commercial or industrial environment where the air composition is flammable.
ELECTRICAL INFORMATION
•
Be sure the dehumidifier is properly grounded. To minimize shock
and fire hazards, proper grounding is important. This power cord is
equipped with a three-prong grounding plug for protection against
shock hazards.
•
Your dehumidifier must be used in a properly grounded wall
socket. If your wall socket is not adequately grounded or
protected by a time delay
fuse or circuit breaker, have a qualified electrician install the
proper socket.
•
Avoid fire hazard or electric shock. Do not use an extension cord
or an adapter plug. Do not remove any prong from the/power
cord.
4