Shinco SDZ1-30P, Руководство пользователя

Страница: 10 / 15

Removing Collected Water
There are two ways to remove collected water:
1. Use the bucket
When the bucket is full, remove the bucket and empty it.

Do not move the unit at this time otherwise water may spill on the
floor.

Press sides of bucket gently to unclip the bucket from the unit.

Remove the bucket as shown in the photographs below and empty the
bucket.

Discard water from bucket. Water is not potable and cannot be used for
drinking
2.Continuous Drainage:
Water can be automatically be emptied into a floor drain by
attaching the dehumidifier to a water hose.
STEP
１：
Cut off the power;
STEP
２：
Unscrew the water cap counterclockwise and pull out the
rubber water plug
；
STEP
３：
Connect the water pipe (Inner diameter * wall thickness *
length= 9mm * 2mm * 60cm) to the drainage outlet.
9