Shinco SAD-2401, Руководство пользователя

Страница: 11 / 18

REMOTE CONTROL OPERATION
All the controls on the machine control
panel are replicated on the
「
emote
control unit with the addition of the Auto­
Mode (J). Press this button to select
AUTO-MODE.
When the Air Quality indicator flashes,
the filters are becoming blocked and
need
「
eplacement.
(See Maintenance on pages 17-19).
After replacing all the filters, press the
RESET button (K) on the remote control
for 2- seconds and the filter service
interval time will be re-set.
OPERATING MODES
When the appliance is first plugged in, you will hear a beep, indicating that the
appliance is operating normally.
If required, set the appliance running at high speed for fast initial cleaning of the air
before adjusting the control to a slower speed.
NORMAL OPERATING MODE
When the appliance is on, it will enter the NORMAL operating mode by default.
p
「
ess the fan speed button (H, M, L, SILENT) as requi
「
ed. The operating status will
be as follows:
• Press the fan speed button to adjust the fan speed as required, the related fan
speed light will be on.
• The Plasma function will be operating by default. Press the'PLASMA'button
to set the plasma function on or off.
• The Air Quality indicator will be on by default. Press the'AIR QUALITY'button
to set the Air Quality indicator on or off.
AUTO MODE
Set the appliance in Auto mode by using the'AUTO'button in the remote
control.
• The high, mid, or low fan speed indicator will all flash in turn, showing that the
appliance is running in AUTO mode.