Dimensions and Specifications
LIMITED EXPRESS WARRANTY: Shimpo Instruments warrants, to the original purchaser of new products only, that this product shall be free from defects in
workmanship and materials under normal use and proper maintenance for one year from the date of original purchase. This warranty shall not be effective if the product
has been subject to overload, misuse, negligence, or accident, or if the product has been repaired or altered outside of Shimpo Instruments’s authorized control in any
respect which in Shimpo Instruments’s judgment, adversely affects its condition or operation.
DISCLAIMER OF ALL OTHER WARRANTIES: The foregoing warranty constitutes the SOLE AND EXCLUSIVE WARRANTY, and Shimpo Instruments hereby
disclaims all other warranties, expressed, statutory or implied, applicable to the product, including, but not limited to all implied warranties of merchantability and fitness.
LIMITATION OF REMEDY: Under this warranty, Shimpo Instruments’ SOLE OBLIGATION SHALL BE TO REPAIR OR REPLACE the defective product or part, at
Shimpo Instruments’ option. Shimpo Instruments reserves the right to satisfy warranty obligation in full by reimbursing Buyer for all payments made to Shimpo Instruments,
whereupon, title shall pass to Shimpo Instruments upon acceptance of return goods. To obtain warranty service, Purchaser must obtain Shimpo Instruments’s authorization
before returning the product, properly repackaged, freight pre-paid to Shimpo Instruments.
INDEMNIFICATION & LIMITATION OF DAMAGES: Buyer agrees to indemnify and hold Shimpo Instruments harmless from and against all claims and damages
imposed upon or incurred arising, directly or indirectly, from Buyer’s failure to perform or satisfy any of the terms described herein. In no event shall Shimpo Instruments
be liable for injuries of any nature involving the product, including incidental or consequential damages to person or property, any economic loss or loss of use.
MERGER CLAUSE: Any statements made by the Seller ’s representative do not constitute warranties except to the extent that they also appear in writing. This writing
constitutes the entire and final expression of the parties’ agreement.
Warranty
MODEL
DT-205L
Display Range
6 to 99,999 rpm
Accuracy
±1 rpm: 6 to 8,300 rpm
±2 rpm: 8,300 to 25,000 rpm
±0.006% of reading ±1 digit (or ±6 rpm max.): 25,000 to 99,999 rpm
Display
5 digit 0.47" (12mm) high LCD
Measuring Units
RPM (on contact using adapter, included)
For YPM, mPM, FPM, IPM and Length: YRD, m, FT and IN
use 6” cir. wheel with 200L adapter
Measuring Distance
14' (4.2 m) maximum
Memory System
13 readings are stored in memory and retained for 5 minutes
(last, max., min. and 10 extra measurements)
Detection
Laser diode
System Control
Single chip C-MOS microprocessor
Over Range Indicator
Flashing numerals
Update Time
1 second (typical)
Batteries Included
Size: 2 AA 1.5V
Life: Approx. 40 hrs
Low Voltage Indicator
Flashing “LO BAT” display
Operating Temperature
32° to 113°F (0° to 45°C)
Construction
Die-cast aluminum housing
Weight
0.8 lb (365g)
Dimensions
6.6"L x 2.4"W x 1.8"H (167 mm x 60 mm x 46 mm)
Warranty
1 year
STANDARD ACCESSORIES
Reflective tape, cone adapter, carrying case,
master wheel (6" cir.) and 200L adapter
The following are general checkpoints; please call your local Shimpo representative or contact Shimpo Instruments directly for further
assistance.
No laser beam is evident:
• Confirm that power switch is functioning
• Confirm that batteries are functioning and that polarity is correct
Inaccurate measurement results:
• If the surface being measured is highly reflective, it may need to be painted a darker color in order to ensure reliable results
• Beam may not be hitting the reflective tape, or taped area may be too small
• Measuring distance may be too short (unit must be at least 5” from intended mark)
Troubleshooting