background image

4.4 Printing

The Printing menu contains three selectable items: Print Recent, 
Print Selected and Print All. (Figure 4-4a) The data saved in mem-
ory can be output to a printer through the serial port RS232 con-
nection. (See 6.2.1 RS232 for more information) An example test 
report is shown in Figure 4-4b.

Figure 

4-4a

Figure 

4-4b

4.4.1 Print Recent

Print recently stored data in this menu. The range is 0~19. (Fig-
ure 4-4c) Touch “ZERO” to adjust the value. Touch “MODE”    
to shift to the next position. Press “LOG” to cancel. Press  
“MENU” to confirm.

Figure 4-4c

4.4.2 Print Selected

In this menu, select the data range to print. Touch “ZERO” to 
adjust the value, touch “MODE” to shift to the next position. 
Press “LOG” to cancel; touch “MENU” to confirm. (Figure 4-4d)

Figure 4-4d

4.4.3 Print All

To print all data saved in memory, a prompt window will dis-
play. All data will be printed by selecting “YES”. This operation 
will be canceled by selecting “NO” or touching “LOG”. (Figure 
4-4e)

Figure 4-4e

4.5 System

Under the System menu, several parameters may be set per Fig-
ure 4-5a, 4-5b.

Figure 4-5a 

         Figure 4-5b

4.5.1 Display Mode

Two display modes may be selected: Digital and Graphic (Fig-
ure 4-5c)

Figure 

4-5c

4.5.2 Display Direction

Select the mode of the LCD display: Automatic, Obverse and 
Reverse. Touch “ZERO” or “MODE” keys to shift to the next 
position.  Press “LOG” to cancel; Push “MENU” to confirm and 
exit. (Figure 4-5d)

            

Figure 4-5d

4.5.3 Auto Power Off

To maximize battery life, the power can be set to shutdown 
after non-use. The time can be set in this menu. The range is 
01-99 minutes. When set to “99” the gauge will never turn off.
Touch “ZERO” to adjust the value, touch “MODE” to shift to the
next position. Press “LOG” to cancel; Push “MENU” to confirm
and exit. (Figure 4-5e)

  Figure 4-5e

4.5.4 Backlight

Under this menu, the backlight can be set to ON, OFF or have 
an auto shutdown. Touch “ZERO” or “MODE” keys to shift to 
the next position. Press “LOG” to cancel. Press “MENU” to 
confirm and exit. (Figure 4-5f)

 

Figure 

4-5f

4.5.5 Key Tone

Turn the key sound ON or OFF. Touch “ZERO” or “MODE”      
keys to shift to the next position. Touch “LOG” to cancel; Press     
“MENU” to confirm and exit. (Figure 4-5g)

 

 

 

Figure 4-5g

5

www.

.com

[email protected]

1.800.561.8187

Содержание FG-7000L Series









Отзывы: