Shimano Nexus INTER 5E SG-C7000-5C, Руководство по обслуживанию

Страница: 68 / 85

67
Return to index page
Install so that the protrusion in the center of
the E-ring fits into the hole in the hub axle.
E-ring
Ring Gear1 return spring
15.
Install a new E-ring.
16.
Install the Ring Gear1 return
spring.
NOTICE
•
If you cannot see the hole in the hub
axle, the carrier unit might not be
installed properly. Return to step 12
and reinstall it.
NOTICE
•
Be careful not to injure your fingers
with the hooks on either end of the
spring.
(1) Insert the larger of the two hooks on either
end of the spring into the hole in ring gear1.
(2) Insert the other hook into the fourth
protrusion on the right gear1 washer from
the hole in ring gear1.
Assembling the Internal Assembly
Contact point of E-ring
and Carrier Unit