10
(4) Trip distance group (TIM, DST, MAX, AVE)
The trip distance group includes trip time (TIM) , trip distance (DST)
maximum speed during trip (MAX) average speed during trip (AVE) .
To activate the trip distance group, press Mode button to (TIM) and press
ST/SP button to activate.
The km/mile symbol will blink. The computer will automatically record
data whenever the wheel sensor is activated by wheel rotation. The
computer will automatically stop recording data when the wheel stops
rotating.
To manually stop functions, press the ST/SP button once.
To reset trip distance group, press the Mode button and ST/SP button
simultaneously.
Whole group will reset to zero.
Additionally, while this group is operating the km/mph, rpm and F - R
displays will flash.
Average speed (AVE)
0.0 (2.0) - 130.0km/h
0.0 (1.2) - 80mph.
Trip time (TIM)
0 - 99:59:59 (h ; min ; sec)
Trip distance (DST)
0 - 999.99 (km, mile)
Maximum speed (MAX)
0.0 (2.0) - 130.0km/h
Note;
To calculate the average speed,
You must travel for more than 10
seconds or more.
An arrow - up displayed indicates
that your current speed is faster
than your average speed and an
arrow - down if the speed is lower.
If the trip time exceeds 100hours or the trip distance exceeds
1,000kilometers (620miles), “ER” will be displayed and the pace arrow
comparison will disappear. However, TIM and DST measurements will start
again from zero and the MAX speed will be retained.
Содержание FlightDeck SC-6500
Страница 1: ......
