Shimano CLARIS Series, Руководство дилера

Страница: 27 / 48

27
MAINTENANCE
How to pull out a disconnected inner end (shifting cable)
„
How to pull out a disconnected inner end (shifting cable)
* If it is hard to pull out the inner end, follow the procedure below.
1
Remove the lever from the handle, and then remove the bracket cover.
TECH TIPS
Should the inner cable break, it is
recommended that you also replace the cable
guide together with the inner cable in order
to maintain smooth shifting.
2
(A)
(B)
Remove the screw located at the bottom
of the bracket, and then remove the unit
cover.
(A)
Screwdriver[#1]
(B)
Unit cover
3
Pull out the inner end on the cable hook
of the winding body.
NOTE
At this point, be careful not to touch the
spring accidentally. Doing so could cause a
malfunction.
Spring
4
Reattach the unit cover and then tighten the screws.
Tightening torque
0.2 - 0.25 N·m