Shimadzu GC17A/GC14C
3 Installation Procedure
3 Installation Procedure
3.1 Shimadzu GC 17A/14C setup - communication
The RS232
"Interface board"
from Shimadzu or Opt-USB Adapter from
DataApex
must be installed.
The
Communication
setting is in
Function 15
Most of the parameters must correspond with the setting from the
Shimadzu GC-17A/14C Setup
dialog.
Current loop protocol
must be set to
EXTEND
.
Baud rate
must correspond with the setting in the
Shimadzu GC-17A/14C
Setup
dialog. Recommended value is
4800
.
Communication protocol
must be set to
OPTICAL LINK
, not to RS-232C
(mistake of Shimadzu).
File format
must be set
14CH MODE
.
Parity
must correspond with the setting in the
Shimadzu GC- 17A/14C
Setup
dialog.
Note:
There is a Shimadzu mistake causing that EVEN = NONE and NONE =
EVEN, but we have amended it by swapping the meanings too to provide
corresponding settings.
- 3 -
