61
12. Units
12. Units
The AUW-D/AUW/AUX/AUY series allow display of various mass units. Units that are registered
beforehand can be called by simply pressing the
[UNIT]
key when in mass display.
The default units are gram, percentage, PCS, and carat. In order to use the other units included in the
AUW-D/AUW/AUX/AUY series, register the units beforehand according to section
. Units that are
not needed can also be removed from registration.
Registration of units for piece counting and specific gravity measurements are also covered in section
. For information about piece counting, refer to
. Refer to
for solid specific gravity mea-
for liquid density measurement.
12.1 Setting Units of Measurement
1
Press the
[CAL]
key repeatedly from the mass
display until “FUnC.SEL” is showing. Press the
[O/T]
key to display “CAL”.
2
Press the
[CAL]
key repeatedly until “Unit.SEL”
appears and press the
[O/T]
key. The display
shows “U- g”.
At this point pressing the
[CAL]
key cycles the
display in the order of the table below. The stabil-
ity mark (
) appears with the units and func-
tions that are currently registered.
...
(When carat is registered)
(Example)
Menu display
Units or function
Reference
“U- g”.
g (gram)
“U- mg”
mg (milligram)
∗∗
“U- %”
percentage conversion
See
“U- PCS”
piece counting
“U- ct”
ct (carat)
“U- ,d”
solid specific gravity measurement
See
“U- d”
liquid density measurement
“U- mom”
monme
∗
“U- Lb”.
pound
∗
“U- Oz”
ounce
∗
“U- Ozt”
Troy ounce
∗
“U- HK”
Hong Kong tael
∗
(continued)
