Shihlin electric SE2 Series, Руководство пользователя

Страница: 97 / 160

91
4. Parameter description
Parameter
4.36 Multi-function Terminals Function Selection (P.80~P.84, P.86)
P.80~P.84, P.86 “Multi-function terminals function selection”
Para-
meter
Termi
nal
Factory
setting
Setting
range
Value
Function
name
Function description Remarks
80 M0 2 0~39
0 STF
In
‘external mode’,
‘combined mode 1’, or
‘combined mode 3’,
when STF is ‘on’, the
inverter runs forwards.
In programmed
operation mode,
it is used as start
signal terminal.
1 STR
In
‘external mode’,
‘combined mode 1’, or
‘combined mode 3’,
when STF is ‘on’, the
inverter runs reverse.
In programmed
operation mode,
it is used as
pause
signal
terminal.
2 RL Multi-speed Please refer to
P.4~P.6
3 RM Multi-speed
4 RH Multi-speed
Please refer to
P.4~P.6
81 M1 3 0~39
5 AU
In
‘external mode’,
‘combined mode 2’or
‘combined mode 4’,
when AU is ‘on’, the
inverter
target
frequency is set by the
signal
input across
terminal 4-5.
Please refer to
P.39
6 OH (Note 3)
7 MRS
When MRS is ‘turned
on’,
the output
terminates.
8 RT
When RT is ‘on’, the
characteristics are the
same as the second
function.
Please refer to
P.44
9
EXJ
（
External
JOG
）
In
‘external mode’,
when EXJ is ‘on’
，
the
target frequency is set
by
P.15, the
acceleration/
deceleration time is set
by P.16 (Note 4).