SHIFT4 UTG Ingenico 3070 Скачать руководство пользователя страница 18

Страница: 18 / 64

Universal Transaction Gateway

Using Legacy External Devices

Version 1.4

External Use NDA

Page 18 of 64

Displaying Line Item Details on the PIN Pad

It is possible to display line item details on the Ingenico series devices. This feature is automatically

enabled as long as the POS/PMS supports it and the required forms are loaded on the PIN pad.

Ingenico Form Flexibility

New functionality provides the merchant the ability to change the current Ingenico PIN Pad forms on

i6550, i6780, iPP320 [U.S.]/350 and iSC250/350/480 models. This includes being able to move the

current static placement of buttons on the following screens:

•

Signature capture screen

•

Amount screen

•

Tip screen

•

Amount with tip screen

Loading Shift4 Template Forms on Ingenico Devices

You must load Shift4 template forms on the following Ingenico devices in order to incorporate and display

greeting, input, and error information associated with transactions:

•

Ingenico 3070

•

Ingenico i6550

•

Ingenico i6780

Requirement:

Before you can load the template forms, the

Ingenico OPOS driver and Ingenico Form Designer application

must be installed on the computer you will use to communicate with

the Ingenico device. This need not be the same computer where

the UTG or UTG Stub is installed.

Both the OPOS driver and the Form Design application are Ingenico products. Contact Ingenico for the

installation files and installation instructions.
Refer to the Ingenico documentation for information about how to install the OPOS driver and the Form

Designer application.

Note:

Contact Ingenico if you have questions about installing the

OPOS driver or Form Designer.

Содержание UTG Ingenico 3070































































Результаты поиска

Содержание UTG Ingenico 3070

Отзывы:

Похожие инструкции для UTG Ingenico 3070

Бренды по названию

Популярные бренды

SHIFT4 UTG Ingenico 3070, Руководство пользователя

Результаты поиска

Содержание UTG Ingenico 3070

Отзывы:

Похожие инструкции для UTG Ingenico 3070

Бренды по названию

Популярные бренды