© 2019 Shift4 Payments, LLC. All rights reserved.
STEP FIVE
RJ12 PORT ON BACK OF RECEIPT PRINTER
If you are using a cash drawer, connect it to the RJ12 port on the back of the receipt printer.
STEP SIX
POWER CABLE PORT ON BACK OF ECHO STATION
STEP SEVEN
If you are using a remote printer, connect an Ethernet cable from the printer to the Harbortouch router.
Next, connect the power cable to the printer and then plug the other end into a power outlet.
Power on the remote printer using the power button on the front of the printer.
BACK OF REMOTE PRINTER
1. Place the thermal paper roll into the top of the receipt printer, feeding from underneath
the roll.
2. Pull 2-3 inches of paper past the paper cutter and close the lid.
3. Press “Feed” to advance the paper.
4. Scratch the paper with your fingernail to ensure the printable side of the thermal paper
is facing up. The printable side of the paper will darken when scratched by your
fingernail.
REPLACING THERMAL PAPER ROLL
ETHERNET PORT
POWER CABLE PORT
Connect the Echo station to a power outlet using the supplied power cable.
To power on the POS station, press the red power button located underneath the bottom right corner of the screen.
To power on the receipt printer, press the power button on the front of the printer.
CASH DRAWER
POWER CABLE
ETHERNET CABLE
POWER CABLE
Technical Support: 877.275.0027 | www.harbortouch.com/support | [email protected]
