5. Control Diagram
6. Instructions for Use
1. Connect both ends of the
electrode cable with two electrode
pads.
2. Plug the electrode cable into one
of the output jacks located at the top
of the unit. Either side A or B.
3. Use a damp towel to wipe the
skin before you place the pads to
remove any body oil, cosmetics or
dirt. Should the pads be soiled, both
their adhesiveness and reusability
will be reduced.
4. Peel off the protective film from
the pads.
5. Apply the pads to the areas of the
body you want to massage.
6. Press the On/Off button on the
top right hand side of the unit to
enable the display. The mode
selected will flash on the LCD
screen and the timer will
automatically be set to 20 minutes.
7. Click the mode area to select your
preferred mode from the 24 modes
available.
8. Increase the intensity when
changing to a new mode until
stimulation is strong but
comfortable. Intensity will return to
the lowest setting automatically
when selecting a new mode or sub-
mode. Press “+” or “-“ buttons on the
side of the unit or tap “+” or “-“ on
Содержание EMS
Страница 7: ......
