User can set a timely test time and the panel will send message to the
CMS at the same time everyday to test the status.
For Example: set 17:30 as the test time, the processes are below:
9
Press
*
for 3 seconds
9 9 9
3
4
Enter system password
Set timing test time,
press 4
Enter timing test time
Set network alarm,press 3
1 7
Enter hour
#
3 0
Enter minute
#
Press
#
to confirm,
Enter the next setting
When the hour and the minute are all 0, it means cancel the test.
Caution: the panel do not conduct the test when the time is 00:00:00
4.7 System Setting
This is a personal setting, including time delay of enter and exit, listen
in time, cycle alarm times, siren on/off setting, telephone test setting,
defense zones setting etc.
1.When the clock of timely arm/disarm is 0:0:0, it means cancel this
timely arm/disarm set.
2.The 4 periods of time should not be superposed, or some time period
may be invalid.
3.If in one time period, the first superpose is larger than the second one,
the period extends to the next day. For Example: if the time period is
from “17:30---8:00”, the period is from 17:30 to the next morning 8:00
4.The 4 arm/disarm time period is just for burglar arm and perimeter
alarm.
User Manual
Содержание STS-408
Страница 1: ......
