Sherwood CD-5505, Руководство по эксплуатации, Страница: 14 / 18

E
N
G
L
IS
H
14
Rectifying any wrong programmed
track/file
Checking the programmed tracks/files
Example :
When track 5, 9 and 7 are programmed and you want to
replace track 9 with track 10 on an Audio CD.
3.
Repeat the above step 2 until the desired tracks
/files are programmed.
2.
While displaying the track(/file) to be replaced
with new one, select track(/file) 10 and store it in
the memory.
• Play starts in the programmed order.
• Each time the PROGRAM button is pressed in the
program mode (meaning “ ” indicator lights up in the
stop mode), the programmed tracks/files are displayed in
the programmed order.
• Then the programmed track(/file) is displayed for several
seconds.
• You can select a track(/file) with pressing the NUMERIC
buttons.
Example : For “10” :
1 0
• When selecting a track with the NUMERIC buttons, the
selected track is stored automatically without the
PROGRAM button.
• When the track/file to be replaced disappears, perform
the above step 1 again.
or
or
4.
Start program play.
Clearing the programmed tracks/files
■
To clear on by one
• Each time the STOP( ) button is pressed in the
program mode, the programmed tracks/files are cleared
one by one in the opposite order.
■
To clear all programmed tracks/files
• Press the STOP( ) button for more than 4 seconds in
the program mode.
• Opening the disc tray or selecting the other playback
source clears all programmed tracks/files, too.
■
To clear a specific track/file
• Find the desired track/file and clear it in the program
mode.
or
or
1.
Find track(/file) 9 in the program mode.
or
within 2 sec.
or
CD-5505(G)_ENG_110113_CD-5505(G)_ENG2011-01-24오전9:28페이지14