SETUP
29
Setup menu
Speaker Setup
If you have connected this player to an Amp/Receiver or Home theater via the 5.1 channel Analog
outputs you need to set the Speaker Options for the best sound.
1
Follow steps 1-3 as shown under ‘
Digital
Output
’.
2
Press the
…†
buttons to select ‘
Speaker
Setup
’, then press the
√
and the OK button.
Then 5.1CH screen will be displayed.
3
Select the speaker setting that needs adjusting by
pressing
…†
buttons.
Adjust the setting by pressing the
œ √
buttons.
•
SPEAKER SETUP
-
C (Center)
- Large, Small or None
-
L/R (Left front speaker/Right front
speaker)
- Large or Small
-
LS/RS (Left Surround speaker/Right
Surround speaker)
- Large, Small or None
-
LFE (Subwoofer)
- LFE or None
•
SPEAKER
• Large : Select when the speaker supports
low-frequency (under 100Hz) reproduction.
• Small : Select when the speaker does not
support low-frequency reproduction.
• Test tone will be sent to L-> C -> R -> RS -> LS -> LFE in order so you can make sure the speakers are set
up correctly.
• Press the
…†
buttons to return to the previous menu. Press the RETURN button to exit the menu.
• If LFE is on, bass below 100Hz will be outputted through a Subwoofer instead of the speakers.
• If LFE is off and front speaker is set to Large, LFE sound will be outputted through the Front Speaker.
• None : Select to disable the speakers.
4
When done, use the
…†
buttons to select “Confirm” and press the OK button to confirm your
choice.
Digital Output(S/PDIF)
Digital Output(HDMI)
Speaker Setup
PCM Down Sampling
Dynamic Compression
5.1 CH
OK
Select
RETURN
Back
…†œ √
Move
Digital Output(S/PDIF)
Digital Output(HDMI)
Speaker Setup
PCM Down Sampling
Dynamic Compression
OK
Select
RETURN
Back
…†œ √
Move
Speaker Setup - 5.1 CH
L
R
Ls
Rs
C
LFE
Confirm
Test Tone
Large
Large
Large
Large
Large
LFE
OK
Select
RETURN
Back
…†œ √
Move
BDP-6003-English
2008.12.5
6:19
PM
˘
`
29